Products

       At first from material and material supplier after a rigorous selection process, we choice all right         components for each items, we have advanced workshop, quality control system, specially custom         design engineers. OEM/ODM is welcome and can be done in donghua.
MODEL:HPS-65 Single Output Switching Power Supply

Features:
¡¤ High efficiency, high reliability
¡¤Universal AC input/ full range
¡¤Low leakage current <0.5mA
¡¤100% full load burn-in test
¡¤Protections: Short circuit/ Over load/ Over voltage
¡¤Cooling by free air convection
¡¤Fixed switching frequency at 65KHz
¡¤1 year warranty
¡¤Dimensions: 127*76.2*42mm (L*W*H)



casing No. : H014
MODEL
HPS-65-3.3
HPS-65-5
HPS-65-7.5
HPS-65-12
HPS-65-13.5
HPS-65-15
HPS-65-24
HPS-65-27
HPS-65-48
OUTPUT DC Voltage
3.3V
5V
7.5V
12V
13.5V
15V
24V
27V
48V
Voltage Tolerance
¡À3.0%
¡À3.0%
¡À3.0%
¡À2%
¡À2%
¡À2%
¡À2%
¡À2%
¡À2%
Rated Current
12A
12A
8A
5.2A
4.7A
4.2A
2.7A
2.4A
1.3A
Current Range
0-15.2A
0-13.8A
0-9.6A
0-6A
0-5.4A
0-4.8A
0-3A
0-2.7A
0-1.5A
Rated Power
39.6W
60W
60W
62.4W
63.5W
63W
64.8W
64.8W
64.8W
Ripple & Noise
80mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
DC Adjustment Range
-5%£¬+10%
-5%£¬+10%
-5%£¬+10%
-5%£¬+10%
-5%£¬+10%
-5%£¬+10%
-5%£¬+10%
-5%£¬+10%
-5%£¬+10%
Setup, Rise, Hold Time
800ms, 20ms, 60ms at full load
INPUT Voltage Range
90¡«264VAC47¡«440Hz £¬127~370VDC
AC Current
1.2A/115VAC0.72A/230VAC
Efficiency
69%
76%
79%
79%
79%
79%
80%
80%
80%
Inrush Current
Cold start 20A/115VAC40A/230VAC
Leakage Current
<0.5 mA/240VAC
PROTECTION Over Load
53-75W£¨3.3V:36-55W£©Hiccup mode, recovers automatically after fault condition is removed
Over Voltage
115%~135%Hiccup mode, recovers automatically after fault condition is removed
ENVIRONMENT Working Temp., Humidity
-10¡æ¡«+60¡æ£»20%¡«90 %RH
Storage Temp., Humidity
-20¡æ¡«+85¡æ£»10%¡«95 %RH
Vibration
10¡«500Hz£¬2G 10min./1cycle, period for 60min, each along X, Y, Z axes
SAFETY Withstand Voltage
I/P-O/P:3KVAC I/P-O/P:1.5KVAC O/P-FG: 0.5KVAC
Isolation Resistance
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC
STANDARD Safety Standard
Design refer to UL60950, TUV EN60950-1
EMC Standard
Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024
OTHERS Weight
0.21Kg
Packing
54pcs/14.2Kg/1.35CUFT
NOTE 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25¡æ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12¡åtwisted pair-wire terminated with a 0.1¦Ì & 47¦Ì parallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
5. Mounting holes M1 and M2 should be grounded for EMI purposes.