Products

       At first from material and material supplier after a rigorous selection process, we choice all right         components for each items, we have advanced workshop, quality control system, specially custom         design engineers. OEM/ODM is welcome and can be done in donghua.
MODEL:HPD-65 Dual Output Switching Power Supply

Features:
¡¤ High efficiency, high reliability
¡¤Universal AC input/ full range
¡¤Low leakage current <0.5mA
¡¤100% full load burn-in test
¡¤Protections: Short circuit/ Over load/ Over voltage
¡¤Cooling by free air convection
¡¤Fixed switching frequency at 65KHz
¡¤1 year warranty
¡¤Dimensions: 127*76.2*42mm(L*W*H)

 



casing No. : H014

MODEL

HPD-65A

HPD-65B

CH1

CH2

CH1

CH2

OUTPUT

DC Voltage

5V

12V

5V

24V

Voltage Tolerance

¡À4.0%

¡À7.0%

¡À4.0%

¡À7.0%

Rated Current

5.5A

2.8A

3.5A

2A

Current Range

0.4-7A

0.2-3.2A

0.4-6A

0.2-2.6A

Rated Power

61.1W

65.5W

Ripple & Noise

50mVp-p

120mVp-p

50mVp-p

150mVp-p

Setup,Rise,Hold Time

800ms, 20ms £¬60ms at full load

INPUT

Voltage Range

90¡«264VAC 47¡«440Hz £¬127~370VDC

AC Current

1.5A/115VAC0.9A/230VAC

Efficiency

78%

81%

Inrush Current

Cold start 20A/115VAC40A/230VAC

Leakage Current

<0.5 mA

PROTECTION

Over Load

73-105W

Protection:Hiccup mode, recovers automatically after fault condition is removed

Over Voltage

CH1£º115%~135%

Protection:Hiccup mode, recovers automatically after fault condition is removed

ENVIRONMENT

Working Temp., Humidity

-10¡æ¡«+60¡æ£»20%¡«90 %RH

Storage Temp., Humidity

-20¡æ¡«+85¡æ£»10%¡«95 %RH

Vibration

10¡«500Hz£¬2G 10min./1cycle, period for 60min, each along X, Y, Z axes

SAFETY

Withstand Voltage

I/P-O/P:3KVAC I/P-O/P:1.5KVAC O/P-FG: 0.5KVAC

Isolation Resistance

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC

STANDARD

Safety Standard

Design refer to UL60950, TUV EN60950-1

EMC Standard

Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024

OTHERS

Weight

0.24Kg

Packing

54pcs/15Kg/1.35CUFT

NOTE

1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25¡æ of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12¡åtwisted pair-wire terminated with a 0.1¦Ì & 47¦Ì parallel capacitor.

3.Tolerance: includes set up tolerance, line regulation and load regulation.

4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

5. Mounting holes M1 and M2 should be grounded for EMI purposes.