Products

       At first from material and material supplier after a rigorous selection process, we choice all right         components for each items, we have advanced workshop, quality control system, specially custom         design engineers. OEM/ODM is welcome and can be done in donghua.
MODEL:HDRP-240 Single Output Industrial DIN Rail Power Supply

Features:
Universal AC input/Full range
Built in active PFC function
Protections: Short circuit/Over load/ Over voltage/ Over temperature
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
UL 508(industrial control equipment)approved
LED indicator for power on
100% full load burn-in test
Fixed switching frequency at 100KHz
3 years warranty
Dimensions:125.5*125.2*100mm£¨W*H*D£©



Shell code£ºH070

MODEL

HDRP-240-24

HDRP-240-48

OUTPUT

DC VOLTAGE

24V

48V

VOLTAGE TOLERANCE

¡À1%

¡À1%

RATED CURRENT

10A

5A

CURRENT RANGE

0-10A

0-5A

RATED POWER

240W

240W

Ripple & Noise

80mVp-p

150mVp-p

Voltage adj.range

24~28V

48~53V

Setup,Rise time

800ms,40ms/220VAC 800ms,40ms/115VAC at full load

Hold up time

24ms/230VAC 24ms/115VAC at full load

INPUT

VOLTAGE RANGE

85¡«264VAC 120¡«370VDC

AC CURRENT

2.8A/115VAC 1.4A/230VAC

Efficiency

84%

85%

INRUSH CURRENT

Cold start current:27A/115VAC 45A/230VAC

LEAKAGE CURRENT

<3.5mA/240VAC

PROTECTION

OVER LOAD

105%~150% rated output power

Protection type£ºConstant current limiting,recovers automatically after fault condition is removed

OVER VOLTAGE

30~36V

54~60V

Protection type: shut down o/p voltage,re-power on to recover

HIGH TEMPERATURE

100¡ãC¡À5¡ãC (TSW1)detect on heat sink of power transistor

Protection£º shut down o/p voltage , recovers automatically after temperature gose down

ENVIRONMENT

WORKING TEMP.HUMIDITY

-10¡æ¡«+70¡æ; 20%¡«90 %RH non-condensing(refer to¡°Derating Curve¡±)

STORAGE TEMP.HUMIDITY

-20¡æ¡«+85¡æ; 10%¡«95 %RH

VIBRATION

10¡«500Hz,2G 10min./1cycle, 60min, each along X, Y, Z axes; Mounting£ºCompliance to IEC60068-2-6

SAFETY

Withstand Voltage

I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC

Isolation Resistance

I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC

STANDARD

SAFETY STANDARDS

UL508,UL60950-1,TUV EN60950-1

EMC Standard

EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2(EN50082-2)

OTHERS

Weight

1.2kg

PACKING

12pcs/15.5kg/1.29 CBM

NOTE

1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25¡æ of ambient
temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12¡åtwisted pair-wire terminated with a 0.1¦Ì &47¦Ì parallel capacitor.
3.Tolerance: includes set up tolerance, voltage regulation and current regulation
4.The power supply is considered a component which will be installed into a final equipment.The final equipment must be re-confirmed that it still meets EMC directives
5.Derating may be needed under low input voltages.Please check the derating curve for more details